Micro2440 + VGA : VGA output converter for our MICRO2440 development board. Ready-to-go solution! With this converter you can directly connect our boards to your PC display with a resolution up to 1024 x 760 @ 70Hz.
All the released VGA converter boards are performing perfectly, with absolutely no blinking under 1024 x 760 resolution, no screen tearing, and no time delay! It supports all LCD displays on the market. It can be used for industrial control displays, embedded tabletPCs, vehicle displays, advertising machines, Bus TVs, touch inquiring machines, cash registers , etc.
Micro2440 S3C2440 ARM9 Board+VGA Conversion Module
Features:
CPU
-Samsung S3C2440A 400MHz, Max freq. 533Mhz
SDRAM
-64MB SDRAM
-32bits Data Bus width
-100MHz Clock
Flash
-256MB / 1GB Nand Flash,
-2MB Nor Flash, BIOS installed
Interface and Resource
-1 x 10/100M Ethernet RJ-45(DM9000)
-3 x Serial Ports(1 RS232 with CTS and RTS)
-1 x USB Host
-1 x USB Slave Type B
-1 x SD Card Interface
-1 x Stereo audio out, 1 Micro In
-1 x 10-Pin JTAG
-4 x USER LEDs
-6 x USER buttons
-1 x PWM Beeper
-1 x POT can be used for A/D converter adjust
-1 x AT24C08 for I2C test
-1 x 20-Pin Camera Interface
-1 x Battery for RTC
-1 x Power In(5V), with switch and lamp
Oscillator Freq.
-12MHz
RTC
-Internal
Expand Interface
-1 x 34-Pin 2.0mm GPIO
-1 x 40-Pin 2.0mm System Bus
Dimension
-100 x 100(mm)
OS Support
-Linux 2.6.29
-Windows CE.Net 5.0
Content List:
(1) 1 x S3C2440 board (Preload with Linux)
(2) 1 x Serial cable
(3) 1 x Net cable
(4) 1 x USB cable
(5) 1 x 5V power adapter
(6) 1 x JTAG board(for H-JTAG)
(7) 1 x DVD-ROM with product reference
(8) 1 x 1024×768@70Hz VGA conversion module
